Industry News

EOS unveils HELIOR triple-laser large-format SLS system at Formnext

EOS has launched HELIOR, an SLS platform with three 70 W lasers and a 700 x 380 x 580 mm build volume, at Formnext 2026; available from December 2026.

EOS HELIOR SLS polimer 3D baskı sistemi
Contents
  1. Three lasers, 154 litres in 24 hours
  2. More than 1,000 litres before maintenance
  3. Validated by five contract manufacturers

EOS has launched EOS HELIOR, a large-format selective laser sintering (SLS) platform for volume production of polymer parts, at Formnext 2026 in Frankfurt on 17 November 2026. The company says the system will be commercially available from December 2026.

Three lasers, 154 litres in 24 hours

HELIOR combines a 700 x 380 x 580 mm build volume, which EOS describes as one of the largest SLS build volumes on the market, with three 70 W lasers managed by dynamic load balancing. According to EOS, the machine delivers up to 80 percent higher throughput, producing 154 litres at 10 percent packing density in a 24-hour build cycle, which the company says enables around-the-clock production at a lower cost per part.

An independently adjustable roller recoater works together with geometry-aware advanced exposure parameters. EOS says this produces a less dense powder cake and cuts post-processing effort by up to 80 percent. The company also points to part homogeneity across the whole build chamber (3D EOSAME), Z-direction accuracy (Smart Scaling) and one-click build optimisation through advanced process parameters.

More than 1,000 litres before maintenance

HELIOR is built on a platform that, according to EOS, has been in industrial operation at leading contract manufacturers for more than 15 years. “Whether manufacturing one part or one million, margins matter,” said Joachim Zettler, chief technology officer at EOS. He said the system supports a full week of build jobs and more than 1,000 litres of production before maintenance operations, while less post-processing and labour, integrated monitoring, open data access and reduced maintenance make output more efficient and predictable.

Validated by five contract manufacturers

EOS developed HELIOR with input from dozens of high-volume additive manufacturing businesses and validated it in production with five pilot customers: FKM Additive Manufacturing, Prototal Group, Materialise, Shapeways and Formrise. “The higher productivity of the new system generation fits perfectly with our single-shift operation. We can complete a full build job every day and achieve significantly better machine utilization,” said Matthias Henkel, managing director of FKM Additive Manufacturing, adding that this simplifies production planning and has an immediate positive impact on profitability.

At launch, HELIOR comes with validated process parameters for PA 2200 and PA 2220 HighReuse, and further materials will be qualified on customer request. It can run as a standalone machine or as part of a fully integrated production cell, with closed powder feeding and automated unpacking supplied in partnership with AM Solutions. The system is on show at Formnext 2026, 17-20 November, in hall 12.0, booth D71.

Sources

  • EOS GmbH, “Polymer Additive Manufacturing Production Has a New Name: EOS HELIOR”, press release, Frankfurt, 17.11.2026 – eos.info
  • EOS GmbH, press release PDF, 17.11.2026 – eos.info (PDF)

Image: EOS

Mesut Kul
Advertisement

Leave a Reply